Our Products

Xymertec develops and manufactures innovative resins and coatings for your flooring applications. Our chemists embrace the latest technical advancements that will help you deliver the perfect resin floor in rapid time – a real boost for your profit margins… and without sacrifice to quality

Our range of products have been developed to solve real industry problems: from improving speed of application to creating a finish that will last …no matter the abuse it receives.

An example of the results of our R&D is the introduction of Xymertol Advanced Cure Technology (ACT) that has been used to formulate our new Xymertol Prime, Xymertol Tough and Xymertol Line. Benefits include: A long pot life, easy application and can be over coated in 20-40 minutes. 

If you are looking to purchase our products online, please head to www.resinstore.com or call us on 01885 483124

This product has been developed for coating potable water tanks, fish tanks and water treatment systems. It is sufficiently flexible to cope with the expansion and contraction of steel tanks caused by extremes of temperature. Its resin and hardener components are formulated with materials that are approved for contact with potable water. ARMOURGUARD PW’s superb barrier properties prevent oxygen and moisture reaching the surface of the substrate.

 

This is a recently developed two part epoxy-ceramic metal primer and coating that contains a functional liquid rubber that forms minute spherical droplets within the epoxy binder. fter application the rubber reacts with the epoxy hardener rendering the coating flexible and impact resistant.

 

This is a low viscosity, solvent free epoxy wood primer which penetrates into timber saturating it before curing. It’s primary use is as a primer under other coatings but it can also be used for the restoration of old timber by the resin impregnation technique, or in new construction as a pre-treatment for epoxy glued joints.  

An unpigmented, low solvent, two part polyurethane/ urea concrete primer that in cold conditions is ready to re-coat in 20 minutes down to a temperature 0°c, thanks to the use of Cold Cure Technology.

The primer for time critical projects on existing concrete floors. Xymertol Rapid Prime is a two part polyurethan/urea concrete primer that is ready to re-coat in 20-40 minutes thanks to the use of Advanced Cure Technology.

A rapid curing, two pack modified polyurea coating that is available in a range of colours. It has a long pot life but quickly cures to a hard, but slightly flexible surface that is extremely abrasion resistant.

A specially formulated, two part epoxy system that when mixed with its aggregate pack will provide a low viscosity compound which is easy to apply with simple equipment. 

A clear, UV stabilised epoxy resin and hardener that contains a unique blend of additives which produce a perfectly smooth defect free surface. It is available in fluid and thixotropic versions to enable a variety of effects to be achieved, including Marble and Flake. Perfect for any decorative flooring system. 

A clear, scratch resistant polyaspartic coating for arduous conditions. Available in slow, medium and rapid cure speeds and in gloss, semi gloss and matt finishes. Ideal topcoat for any decorative flooring project. 

A two part, totally solvent free, mineral filled epoxy floor coating. It has good wear and abrasion resistance and is suitable for use use on industrial floors where the durability of our ceramic filled coatings are not required. It has excellent opacity and covering power, is resistant to oil, petrol, diesel fuel, most chemicals and has good resistance to sunlight.

A two-part, low solvent, epoxy primer that has been developed for application to cured concrete floors, tanks and structures where it will provide excellent adhesion together with good porosity and pin hole sealing properties. 

A two part, totally solvent free, ceramic filled epoxy floor coating. It has exceptional wear and abrasion resistance and is suitable for use in high wear areas and in situations where the use of solvent containing paints may be a problem. It has excellent opacity and covering power, is resistant to oil, petrol, diesel fuel, most chemicals and has good resistance to sunlight.

A two part, totally solvent free, ceramic filled epoxy floor coating. It has exceptional wear and abrasion resistance and is suitable for use in high wear areas and in situations where the use of solvent containing paints may be a problem. It has excellent opacity and covering power, is resistant to oil, petrol, diesel fuel, most chemicals and has good resistance to sunlight.

A two-part, low solvent, epoxy concrete primer that has a unique formulation that gives it the ability to mix with freshet concrete while still being resistant to diffusion of water through the uncured coating. This attribute enables CONSEAL GREENCRETE to seal moisture into green concrete so that it is able to react with the cement causing it to fully cure, even outdoors, in hot, dry conditions.

A specially formulated two part epoxy system that is available with aggregate packs to product either fine or coarse epoxy mortar. It produces an easy to spread mortar that is extremely strong and hard wearing. 

A specially formulated two part epoxy system that is available with aggregate packs to product either fine or coarse epoxy mortar. It produces an easy to spread mortar that is extremely strong and hard wearing. An additive is also available to allow formation of coving between floors and walls. Can be applied to slopes and vertical surfaces.  

A specially formulated, two part epoxy system that when mixed with its aggregate pack will provide a low viscosity compound which is easy to apply with simple equipment. It will produce a perfect, seamless floor that is completely free from air bubbles and other defects.

Any Questions? Need Advice?

If you’re not sure where to start simply click here to send us an enquiry or call us on 01885 483124